Fire alarm panel - things you need to know
Saturday, February 10th, 2007 Subscribe To Our Feed
No matter how simple or complicated your fire alarm system is it will have a fire alarm panel which you will have to understand. Typically, they are equipped with not just an indicator when a fire has been detected, but they as well display all the other messages to indicate more than one problem with the fire alarm system. Fire drills are helpful in ensuring every person in the family knows what to do. Fire alarm training can help as well.
In any commercial applications, the fire alarm system panel is connected to the fire detectors as well as the building’s sprinkler fire alarm, which provides a flood of water in the even of a fire. The sprinklers in most applications only activate the ones that may have an effect on the fire and does not necessarily cause all of them to release water into the building. The fire alarm panel often indicates which sprinklers have been activated with the aim of note the location of the fire. Systems start at approximately 20.
How fire alarm panel works
Most fire systems are as well connected to an automatic dialing fire alarm that notifies either a call center or the local fire department that a fire has been detected. When the alarm is activated, the fire alarm system panel automatically sends out a call that in the case of a call center, the personnel there may attempt to confirm the alarm is not a false alarm prior to dispatching the fire department.
More than one times smoke detectors are not wired into the fire alarm system panel to avoid the potential for false alarms due to cooking mistakes or possibly outside smoke influencing the detectors reactions. In private residences detectors may be included but usually only if they also hold a heat sensor, activating the fire alarm if the heat indicated is higher than a preset temperature. So why pass up the prospect of protecting your homes.
The fire alarm system panel will also have a means to silence the alarm before the fire department arrives to allow local control over the length of time the audible alarm sounds before the fire department can reset the fire alarm system. Not all fire alarm panels require official involvement in resetting the alarm, but more than one extensive commercial user may be crucial to allow by the fire department.
Placement of the fire alarm system panel is commonly near the main entry door, which might as well allow for ready egress in the event of a fire. This would allow a person to manually activate the alarm as they headed out the door for safety. Its positioning will as well allow the alarm to be silenced as a responsible party entered the building, mainly in the event of a false alarm. Consult with a local fire alarm system company about installing such a fire alarm system. Once each person is there, a count has to be taken to ensure everyone is out safely.
Technorati Tags: Fire alarm panel, Fire alarm panels
Related Tags: No Tags
Possible Related Posts
Leave a Reply
You must be logged in to post a comment.
